bing tracking image

Hyundai Santa Fe Accessories and Parts Installation And Review Videos

     

etrailer Trailer Brake Controller 7-Way RV Upgrade Kit Installation - 2020 Hyundai Santa Fe- Video

etrailer Trailer Brake Controller 7-Way RV Upgrade Kit Installation - 2020 Hyundai Santa Fe

Hey everybody, how's it going Today we're gonna be going over and showing you how to install this 7-Way RV upgrade kit here on a 2020 Hyundai Santa Fe. So this is what our 7-Way is gonna look like installed. It's gonna come with a nice mounting bracket here. You will however, need to find a way to mount this on your vehicle. And if you have the factory trailer hitch you're gonna have a bracket here 4-Way bracket already on there. We'll just simply bend that down and then we can use one of the no-drill brackets we offer here at etrailer. more


Watch Video

4/13/2021 1:01:34 PM



Universal Kit for a Trailer Brake Controller Installation - 2012 Hyundai Santa Fe- Video

Universal Kit for a Trailer Brake Controller Installation - 2012 Hyundai Santa Fe

Today on our 2012 Hyundai Santa Fe we'll be installing an ETBC7 Brake Controller Kit, part number ETBC7. We will also be using the Tow Ready Universal Mounting Bracket, part number 18140. Let's go ahead and start by attaching the new 7-pole bracket to the 7-pole using the hardware supplied with our install kit. Then, we can go ahead and take the Tow Ready Universal Mounting Bracket and attach it to the 7-pole bracket. Next, we'll go ahead and mount the 7-pole and bracket to the hitch using the clamp provided with the Universal Mounting Bracket. With the bracket secured to the hitch, we can go ahead and connect to the 4-pole wire already on the vehicle to the 4-pole wire coming from the 7-pole bracket. more


Watch Video

3/6/2015 11:59:46 AM



Yakima Accessories and Parts Review - 2013 Hyundai Santa Fe- Video

Yakima  Accessories and Parts Review - 2013 Hyundai Santa Fe

Today on our 2013 Hyundai Santa Fe, we are going to be test fitting the 38 inch fairing Yakima roof rack system. It's part number is Y07047. Now I've already removed the carriage bolt and wing nut from the clamp on the end here. Let me show you what I mean, you'll have two of these, you are going to have one on each of the end clamps. I'm just going to remove the large black wing nut and slide out the carriage bolt. We are going to stick this on our pocket, we'll use them here in a little while. more


Watch Video

8/22/2014 12:03:04 PM



Trailer Wiring Harness Installation - 2013 Hyundai Santa Fe 18144- Video

Trailer Wiring Harness Installation - 2013 Hyundai Santa Fe 18144

Today, on our 2013 Hyundai Santa Fe, we'll be installing a Curt wiring harness, with a four pole flat connector, part number C56151. We went ahead and removed the spare tire just to make the installation of our wiring harness easier. Our vehicle is equipped with a factory tow package. The connections will be on the driver's side of the vehicle and are those two plugs right there. We'll need to remove the caps off of the plugs. To do so, you just press in on the little tabs and slide them rearward. more


Watch Video

8/13/2014 2:51:30 AM



Trailer Brake Controller Installation - 2014 Hyundai Santa Fe- Video

Trailer Brake Controller Installation - 2014 Hyundai Santa Fe

All right, today, on this 2014 Hyundai Santa Fe Limited, we are going to install part number 90195. This is Tekonsha Prodigy p3 trailer brake controller. Now to help us with our install, we will also be using part number ETBC7. We are going to start off by making access from the inside to the outside. We will go ahead and drill a pilot hole first on the fire wall from the inside. We will drill a 1/4" pilot hole, now go ahead and use our hole saw, it doesn't really matter what size, just enough to get us some working room so we don't tear up the carpet as much. Now we will be using a step bit to enlarge our hole. We've got our hole drilled out, we will go ahead and mount our circuit breakers. more


Watch Video

3/19/2014 4:36:17 PM



Westin Tube Step Installation - 2011 Hyundai Santa Fe- Video

Westin Tube Step Installation - 2011 Hyundai Santa Fe

Today on this 2011 Hyundai Santa Fe, were using tube steps part number 22-5050 and Installation Kit 22-1815.Were gonna start by laying all the parts because the brackets have a front and rear to them. So, front bracket, a tube step and our rear bracket. Next we need to do in the vehicle. Right next to the rear wheel, theres a rubber plug, well just pop it out of the way. Were working on the passenger side of the vehicle. Now, on the frame rail theres an oval plug that we have to remove as well. more


Watch Video

1/11/2012 3:20:45 PM



  1